Structural characteristics of automatic molding machine

The fully automatic molding machine appeared in the early 19th century. The early fully automatic molding machine designed a simple manual compaction mechanical mold, and then operated the equipment by means of compressed air. The injection molding machine injects the mortar into the flask uniformly, pre-compresses and compacts, and then applies pressure for compaction. In the vibration pressure forming process, the pressure can be greatly increased, the surface roughness can be improved by one level, and the product quality is stable. At the same time, it is equipped with a detonation buffer spring, which can effectively reduce the wear and tear of the machine. It adopts injection molding mechanism such as cylinder, crank, connecting rod and automatic molding machine. The ejector shaft is used to control all pneumatic components for overall functionality. Easy to operate and maintain.
Here's what you need to know:
1. Check the cooling system and pay attention to whether the automatic forming machine is normal. If it is not normal, stop using it immediately and ask professional technicians to repair it.
2. Frequent data cleaning, dust removal and processing, usually once every two months.
In the event of an emergency failure, do not attempt to repair it in the first place to avoid casualties.
4. Insist on troubleshooting such as tightening every week.
5 Cut off the power before working or when no one is there.
6. Comply with the general practice of automatic injection molding machine and core making.
7. Note that the adjustment screw is to start cutting the lift implied height of the lift pin.
8. According to the needs of enterprise production, the adjustment system can automatically control the level of shock piston by adjusting the height of the screw, and change the frequency of vibration and shock.
9. After the work is finished, it cannot stay in the position of the compaction piston and return to the original position.
Before using the equipment, you need to be familiar with various operating procedures, and you need to check the equipment first, and try not to let the equipment operate idly to reduce damage to the machine.