Single-station automatic molding machine casting post-processing is the top priority

Single-station automatic molding machine casting post-processing is the top priority
The single-station automatic molding machine performs a post-processing process after casting, which has a good effect on extending the service life of the equipment. Post-processing of castings is a process in the production of casting equipment. During casting cleaning, the casting is taken out of the mold, the excess parts outside the body are removed, and the inner and outer surfaces of the casting equipment are polished and finished. The main work is to remove the core and core iron. Molding machine casts non-ferrous alloys for casting non-ferrous alloys, which is a type of casting equipment. There are mainly cast copper alloys, cast aluminum alloys, and cast magnesium alloys. The pattern simulates the shape of the casting to form the process equipment or consumable parts of the mold cavity. In order for the molding machine equipment to produce the required model cavity, the model should have sufficient strength and hardness. The riser is a supplementary part attached to the top or side of the casting equipment to avoid defects in the casting. In the casting mold, the cavity of the riser is the container for storing the liquid metal. Core Box Process casting equipment for forming core sand into cores. Can be made of wood, plastic, metal or other materials.
The unique advantages of the molding machine:
1. Realize high-profit casting production, high production efficiency, and the molding capacity can reach 120 boxes of molding sand per hour.
2. Air flow sanding can improve the quality of sand filling, reduce the defect rate of trachoma, improve the dimensional accuracy of castings, and can adapt to various types of molding sand.
3. The upper and lower boxes are simultaneously ejected to improve the ejection accuracy, reduce the collapse of the box, improve the dimensional accuracy of the castings, and reduce the ejection slope.
4. Extrusion pressure balance control to prevent skewing and deformation of the profile, and existing or thinner double-sided profiles can be used.
5. Operation and maintenance, safety maintenance operation is simple and convenient, the machine PLC system displays fault indication, signal interlock indication, modeling monitor, and safety confirmation software.