The normal cleaning process of the fully automatic molding machine

The normal cleaning process of the fully automatic molding machine
The automatic molding machine is used for the process of heat treatment, shaping, anti-rust treatment and rough machining of the cleaned castings after the equipment treatment. Post-processing of castings is a process in the production of casting equipment.
Casting cleaning is the process of removing the casting from the mold, removing the excess outside the body, and grinding and finishing the inner and outer surfaces of the casting equipment. The main work is to remove the core and core iron.
Casting non-ferrous alloys Non-ferrous alloys used for casting castings are a type of casting equipment. There are mainly cast copper alloys, cast aluminum alloys, and cast magnesium alloys.
The pattern simulates the shape of the casting to form the process equipment or consumable parts of the mold cavity. In order to ensure the formation of the cavity that meets the requirements, the pattern should have sufficient strength and rigidity.
The riser is a supplementary part attached to the top or side of the casting equipment to avoid defects in the casting. In the casting mold, the cavity of the riser is the container for storing the liquid metal. [1]
Core Box Process casting equipment for forming core sand into cores. Can be made of wood, plastic, metal or other materials.
1. Check the cooling water system when molding the molding machine.
2. Check whether the water pipes, air pipes, oil pipes and circuit joints are loose every week.
3. Check the anchor bolts and transmission fasteners every week.
4. Assist the electrician to blow the dust of the electric cabinet in January.
5. It is closely combined with pouring, and it is not necessary to notify the sand mixing in time when molding is not required to prevent the sand in the bucket from drying out if it is not used for a long time.
6. When life safety is endangered or equipment is damaged, press the emergency stop button in red.